Txais tos rau peb cov vev xaib!
Fecral xaim mesh 0cr23al5TI Mesh H23Yu5T
Fectral Hlau Mesh0cr23al5tintxaijH23yu5t
Nqe lus piav qhia:
H23yu5t (0cr23al5ti) Muaj cov yam ntxwv ntawm siab tiv taus, tsis tshua muaj ntsuas kub, tshwj xeeb yog cov khoom siv hauv qab, zoo li cov cuab yeej hluav taws xob, cov hluav taws xob hluav taws xob thiab cov khoom siv hluav taws xob hauv tsev.
Tshuaj Muaj Tshuaj
| Hlau | Tshuaj Muaj Tshuaj | |||||||
| C | Si | Mn | Cr | Ni | Ti | Al | Fe | |
| H23yu5t | ≤ 0.05 | ≤ 0.50 | ≤ 0.30 | 22.0-24.0 | ≤ 0.60 | 0.2-0.5 | 5.00-5.80 | Tus liab |
Khoom:
| Hlau | 0cr23al5ti H23yu5t |
| Yield zog (mpa) | 630-780 |
| Elongation (%) | > 12 |
| Ntws G / CM3 | 7.25 |
| Hluav Taws Xob Tiv Thaiv Hluav Taws Xob (ωmm2 / Txiv neej) | 1.35 ± 0.05 |
| Kev ua haujlwm siab tshaj plaws ua haujlwm tsis tu ncua (° C) | 1250 |
| Melting point (° C) | 1500 |
| Thermal conductivity (KJ / M * H * ° C) | 60.2 |
| Coefficient ntawm linear (α × 10-6 / ° C) | 15.0 |
Cov ntsiab lus loj
| Khoom npe | Loj npaum li cas |
| Txias Kab Hlau Hlau | Inch 0.03-7.5mm |
| Kub-Rolled Hlau Qws | Inch 8.0-12mm |
| Txoj ntaub | Thickness 0.05-0.35mm |
| Dav 0.5.0-3.5mm | |
| Txias Rolled Sawb | Thickness 0.5-2.5mm |
| Dav 5.0-40mm | |
| Kub Rolled Sawb | THICKTE 4-6mm |
| Dav 15-40 hli |
Sau koj cov lus ntawm no thiab xa mus rau peb
